Suction of contaminated lubricants, pumps for dense mixtures and very viscous oils.

Difficulty on extracting and aspirating contaminated lubricants.

peristaltic pumps for suction of contaminated lubricants

The purpose of the application is to simplify the aspiration and replacement of contaminated lubricating mixtures in the gearboxes and drive units present in the wind turbine generators. The maintenance operations foreseen on the wind generation devices are quite frequent. Particularly difficult is the extraction of a type of lubricant which has the consistency of a fluid grease which, once its tribological properties have been exhausted, is replaced also because it contains a significant quantity of contaminating metallic microparticulate generated by the normal wear of the mechanical components.

The dense and viscous consistency of the lubricant creates various complications for maintenance purposes. The biggest problem is the difficulty in aspirating the contaminated lubricants of the gearbox. Our customer experimented different solutions to solve problem without reaching the desired efficiency levels. The different type of pumps put into the test, did not meet expectations, or proved to be ineffective or even damaged very quickly.

Also involved in the affair we were asked to offer our solution. We proposed a pump that would certainly have been the ideal solution for the suction of contaminated lubricants. A HCP 15 peristaltic pump equipped with a very compact electronic speed variation system.

The peristaltic pump, a good solution.

The small unit is particularly light and manageable, easily lifted up to the wind generator’s nacelle. Once started, the large vacuum produced by the HCP 15 peristaltic pump allows the suction of contaminated lubricants and dense mixtures with simplicity. The possibility of varying the flow rate of the pump allows to maximize the performances according to the different viscosity of the sucked lubricating fluids.

The light and compact inverter that the pump is equipped with is managed with a practical keypad with very simplified functions to be used by any operator.

The pump naturally is selfpriming capable and does not damage if it works occasionally dry. The pump do not suffer any damage generated by the presence of solid metal particulate present in the lubricating mass. The machine fully met the expectations of the customer, who with a modest investment was able to equip himself with a definitive solution, easy to use and truly effective for the aspiration of contaminated lubricants.

More information on the pump: Hose Carrier HCP 15

I am interested but without obligation, keep me informed

Facebook
LinkedIn